Mailade och frågade om dessa går att plocka isär för t.ex rengöring och fick detta som svar.
"The UTS 3D silencers are not designed to be dismantled. They need less maintenance than the Featherweight series silencer because of the all the baffles are in Titanium. It is only necessary to allow the silencer to dry after shooting and oil it lightly on the inside with gunoil.
We recommend leaving the silencers on the gun after shooting when it is still warm with the barrel pointing upwards and the breach open. This will dry the silencers as the air flows through the barrel driven by the heat. After each season or every 200 shots or so we recommend using a cleaning bath like the Flunatech or Ballistol silencer cleaner."
